ASROCK TRX40 Taichi Manual page 33

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 24)
Serial ATA3 Connectors
(SATA3_1:
see p.7, No. 22)
(SATA3_2:
see p.7, No. 21)
(SATA3_3_4:
see p.1, No. 15)
(SATA3_5_6:
see p.1, No. 14)
(SATA3_7_8:
SATA3_1
see p.1, No. 13)
USB 2.0 Header
(9-pin USB_1_2)
(see p.1, No. 23)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 16)
(19-pin USB3_7_8)
(see p.1, No. 12)
SPEAKER
DUMMY
DUMMY
+5V
1
PLED+
PLED+
PLED-
SATA3_2
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
1
Dummy IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+
IntA_PA_SSTX-
IntA_PB_SSTX- GND
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- bus
Vbus V
Please connect the
chassis power LED and
the chassis speaker to this
header.
These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There is a header on this
motherboard. This USB
2.0 header can support
two ports.
There are two headers on
this motherboard. Each
USB 3.2 Gen1 header can
support two ports.
TRX40 Taichi
29