System Requirements - Canon SELPHY ES40 User Manual

System Requirements

Windows Vista (including Service Pack 1,
Service Pack 2)
OS
Windows XP Service Pack 2,
Service Pack 3
Configuration The above OS should be pre-installed on computers with built-in USB ports.
CPU Pentium 1.3 GHz or higher
Windows Vista: 1 GB or more
RAM
Windows XP: 512 MB or more
Interface USB
Free Hard Disk
120 MB or more*
Space
Display 1,024 × 768 pixels or more
You need a CD-ROM drive to install the software.

* For Windows XP, Microsoft .NET Framework 2.0 (max. 280MB) must be installed.
SELPHY may not operate correctly if it is connected to a computer via a USB hub.

SELPHY may not function properly if other USB devices (with the exception of a USB mouse

or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
Do not put your computer into the standby mode (or sleep mode) while SELPHY is connected to

the computer's USB port. If you accidentally do so, awaken the computer from the standby mode
without disconnecting the USB cable.
For details on how to awaken the computer refer to the user guide provided with your computer.

Windows Macintosh
Mac OS X v10.4 – v10.5
PowerPC G4/G5 or Intel Processor
512 MB or more
140 MB or more
1,024 × 768 pixels or more