4. Normal/Test Picture Button (Mute Button)
Press to see the normal picture during test pattern adjustment.
< TEST PICTURE >
5. Coarse/Fine Select Button (Mute Button)
Coarse: Press to interpolate data by position the cursor 5 point in width and 5 point in length and
moving the data up/down/left/right.
Fine: Press to move data up/down/left/right only on the position of cursor
6. Line Shift (CH.SCAN)
< HORIZONTAL/LINE SHIFT >
7. Cancel (S.STD)
Press to revert to the previous data
8. Save (MTS)
After the convergence adjustments are completed, press to save data.
9. Exit (S.SEL)
After the convergence adjustments are completed, press to exit to TV mode.
Samsung Electronics
< NORMAL PICTURE >
< VERTICAL/LINE SHIFT >
Alignment and Adjustments
3-15