Page 1
All manuals and user guides at all-guides.com REALITY 9200 TCR+ R9001390 OWNER'S MANUAL...
Page 2
All manuals and user guides at all-guides.com...
Page 3
All manuals and user guides at all-guides.com BARCO PROJECTION SYSTEMS REALITY 9200 TCR+ R9001390 OWNER'S MANUAL Date : Art. No. : 020798 R5975938...
Page 4
The use of shielded cables is required to comply within the limits of Part15 of FCC rules and EN55022. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...
All manuals and user guides at all-guides.com Table of Contents TABLE OF CONTENTS ................................... i-1 UNPACKING AND DIMENSIONS ................................1-1 Unpacking ..................................... 1-1 Projector dimensions ..................................1-1 Battery installation in the RCU..............................1-2 INSTALLATION GUIDELINES ................................2-1 Environment ....................................2-1 What about ambient light ? ................................
Change Baudrate PC .................................. 10-4 Reset Lamp Runtime .................................. 10-4 Lamp Run Time History ................................10-5 Lamp Control ....................................10-5 BARCO logo ....................................10-5 Panel Adjustments ..................................10-6 Preset Input Balance ................................... 10-6 I2C diagnosis....................................10-6 Appendix A : Standard Source Set Up Files ............................A-1 Appendix B : Lenses ....................................
All manuals and user guides at all-guides.com Unpacking and Dimensions UNPACKING AND DIMENSIONS Unpacking Pull To open Warning : To prevent overheating of the projector as table mounted, always remove the wooden board and turn in the 3 supporting feet to allow air circulation via the built-in dust filter at the bottom.
All manuals and user guides at all-guides.com Unpacking and Dimensions Battery installation in the RCU. Note : projector address has to be programmed on the RCU before using the RCU (see chapter 'Controlling'). 3 1 0 a .D R W...
All manuals and user guides at all-guides.com Installation Guidelines INSTALLATION GUIDELINES Installation Guidelines * Environment * What about ambient light ? * Which screen type? T p rr Ãvq u For more information about screens, contact your local screen supplier. * What image size? How big should the image be?
All manuals and user guides at all-guides.com Installation Guidelines * Where to install the projector? Inputs and computer video format input compatibility : Definitions of the Abbreviation on drawings Lens type selection. Ceiling SIDE VIEW Optical axis projection lens Screen CD = B - A Projector Projector...
All manuals and user guides at all-guides.com Location and Functions of Control LOCATION AND FUNCTIONS OF CONTROL Front Panel Terminology ÃÃ!"ÃW T h i s d e v i c e co m p l i e s w i t h P a rt 1 5 o f t h e F C C r u l e s . O p e r a t i o n i s s u b j e c t t o fo ll o w i n g t w o c o n d it i o n s : ÃÃ(ÃÃÃÃÃ#Ã6 ( 1 ) T h is d e v i c e m a y n o t c a u s e h a r m f u l i n t e r f e r e n ce...
Page 12
All manuals and user guides at all-guides.com Location and Functions of Control b. Remote control (;,7 (17(5 67%< 7(;7 )5((= 3$86( +(/3 3+$6( 6+$531(66 EXIT STANDBY 7,17 ENTER &2/25 TEXT PAUSE %5,*+71(66 SHARPN TINT BRIGHTN &2175$67 &2175$67 PHASE COLOR 3 2a Terminology FREEZ Back Light Key...
All manuals and user guides at all-guides.com Installation Set Up INSTALLATION SET UP 5HDU&HLOLQJ ) URQW& HLOLQJ 5HDU7DEOH )URQW7DEOH ADJUST ENTER ENTER ADJUSTMENT MODE ENTER INSTALLATION EXIT or ADJUST ENTER INSTALLATION ENTER EXIT CONFIGURATION ADJUST CONFIGURATION ENTER FRONT/TABLE ENTER EXIT ADJUST...
Page 14
All manuals and user guides at all-guides.com Installation Set Up...
All manuals and user guides at all-guides.com Connections CONNECTIONS AC Power (mains) cord connection 200 to 240 VAC T h i s d e vic e co m p lie s w it h P a r t 1 5 o f th e F C C r u le s . O p e ra t io n is s u b je c t to fo ll o w in g t w o c o n d itio n s : ( 1 ) T h is d e vi ce m a y n o t c a u se h a r m f u l in te r fe r e n c e Fuses...
All manuals and user guides at all-guides.com Connections Lamp Run Time Lamp run time Lamp run time is 1000 hours. Operating the lamp longer than 1000 hours may damage 980 h the projector. Please replace the lamp. WARNING Warning : Using a lamp for more than 1000 hours is dangerous as the lamp could explode.
All manuals and user guides at all-guides.com Connections Fixed RGB analog input (slot 1) P R OJ EC T OR M OD E : GRE E N - O P ERA TIO N DIAGNOSTICS IR-RECEIVER CODE C O M MU NICAT IO N PO RT RE D - S TAN DBY IR-ACKNOWLEDGED RS232 OUT...
All manuals and user guides at all-guides.com Connections Fixed 5-Input Slot (slot 2) P RO JEC TO R M O D E : DIAGNOSTICS G REEN - O PERATIO N CODE C OM MUN ICA TION PORT RED - STAND BY IR-ACKNOWLEDGED RS 232 IN RS232 OUT...
All manuals and user guides at all-guides.com Connections Video/S-video Input Module S-VID EO VIDEO AUD IO W D9 @ P T W D9 @ P ÃDI Q V U PR OJE CT OR M ODE : G REEN - OPERATION DIAGNOSTICS CODE IR-RECEIVER...
All manuals and user guides at all-guides.com Connections RGB Analog Input Module. P R OJ EC TO R M O D E : GRE E N - O PE RA TIO N DIAGNOSTICS CODE IR-RECEIVER IR-ACKNOWLEDGED C O MM UN IC ATIO N PO RT RE D - S TANDB Y RS232 OUT RS 232 IN...
All manuals and user guides at all-guides.com Connections Installation ENTER ADJUSTMENT MODE INSTALLATION Input Slots ENTER INSTALLATION Input Slots INPUT SLOTS ENTER INPUT SLOTS RGB-SS [CV] RGB-SS [CS or HS&VS] RGB-SOG Component Input Module. 8P H QP I@IUÃWD9@P ÃDIQVU PR OJEC T O R M O DE : G REEN - O P ER ATIO N DIAGNOSTICS CODE...
All manuals and user guides at all-guides.com Connections Straps on module level : Ayhvtà ÃÃsyhvtÃv Non-Floating Floating TpÃryrpv T r h h r à p T p à Ã` I h yÃT p U vyrryÃTp RGB3S / RG3sB Input Module.
All manuals and user guides at all-guides.com Connections Straps on Module Level : E ' ÃT p à r yr p v T r h h rà p T p à Ãt r r Non-Floating Floating Ayhvtà ÃÃsyhvtÃv...
All manuals and user guides at all-guides.com Connections Connecting a Computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 input of the projector. P RO JE CTO R M O DE : G REEN - O PERAT IO N DIAGNOSTICS CODE IR-RECEIVER...
All manuals and user guides at all-guides.com Controlling CONTROLLING IR sensor IR sensor How to Use the RCU? ÃÃ ! "Ã W T hi s d ev i c e c om pl i es w i t h P ar t 1 5 of t he F C C r ul es . O per a t i on i s s ub j e c t t o f ol l o w i ng t w o c on di t i on s : Ã...
All manuals and user guides at all-guides.com Controlling How to Display a Projector Address? ADDRESS How to Program an Address into the RCU? PROJECTOR ADDRESS ADDRESS Picture Controls with Direct Access. Brightness Control BRIGHTNESS 'brightness' Contrast Control Color Saturation Tint Control Sharpness Control.
All manuals and user guides at all-guides.com Start up of the Adjustment Mode START UP OF THE ADJUSTMENT MODE Adjustment Mode ADJUST ENTER ADJUSTMENT MODE ENTER EXIT ADJUST Installation Random Access Service PASSWORD ENTER PASSWORD Error EXIT 0 0 0 0...
Page 28
All manuals and user guides at all-guides.com Start up of the Adjustment Mode...
All manuals and user guides at all-guides.com Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE Starting up the Random Access Adjustment Mode ADJUSTMENT MODE ENTER File Service...
All manuals and user guides at all-guides.com Random Access Adjustment Mode File Service ENTER RANDOM ACCESS ADJUSTMENT MODE ENTER EXIT ADJUST FILE SERVICE Load File FILE SERVICE ENTER LOAD FILE ENTER ENTER CONFIRM LOAD FILE ENTER ENTER EXIT Edit File FILE SERVICE EDIT ENTER...
Page 31
All manuals and user guides at all-guides.com Random Access Adjustment Mode EDIT FILE xga.s30 ENTER ENTER ENTER How to find the correct values for the displayed item? (Caution : Do not adjust these settings on an active file, they are used to identify the input source file.) "Horizontal Total Pixels"...
Page 32
All manuals and user guides at all-guides.com Random Access Adjustment Mode Options Source Number EDIT FILE OPTIONS Clamp Position ENTER Clamp Delay Exam ple for clam p position [trailing] Clamp Width Field Polarity Sync pulse ENTER Clamp pulse Field Select Clamp width Clamp...
All manuals and user guides at all-guides.com Random Access Adjustment Mode Rename ENTER FILE SERVICE ENTER RENAME FILE RENAME FILE ENTER EXIT Copy FILE SERVICE ENTER ENTER COPY FILE COPY FILE ENTER EXIT...
All manuals and user guides at all-guides.com Random Access Adjustment Mode Delete FILE SERVICE ENTER ENTER DELETE FILE ENTER CONFIRM EXIT DELETE FILE File Options ENTER FILE SERVICE FILE OPTIONS Picture Tuning ENTER RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING...
All manuals and user guides at all-guides.com Random Access Adjustment Mode CTI ON/OFF PICTURE TUNING CTI [ON] ENTER Still Video PICTURE TUNING STILL VIDEO [ON] The default is 'Still Video' ON for all interlaced video sources. Color Temperature PICTURE TUNING ENTER COLOR TEMPARATURE COLOR TEMPERATURE...
All manuals and user guides at all-guides.com Random Access Adjustment Mode Gamma PICTURE TUNING GAMMA ENTER GAMMA = 2.2 Decoding EBU/IRE PICTURE TUNING DECODING [EBU] ENTER Dynamic Color Depth PICTURE TUNING ENTER DYNAMIC COLOR DEPTH DYNAMIC COLOR DEPTH MED MAX Noise Reduction PICTURE TUNING ENTER...
All manuals and user guides at all-guides.com Random Access Adjustment Mode Edge Enhancement PICTURE TUNING ENTER EDGE ENHANCEMENT EDGE ENHANCEMENT Geometry ENTER RANDOM ACCESS ADJUSTMENT MODE GEOMETRY ENTER ENTER Shift ENTER GEOMETRY...
All manuals and user guides at all-guides.com Random Access Adjustment Mode Size GEOMETRY ENTER Fixed sides Horizontal size adjustment Vertical size adjustment Example for table mount configuration Side Keystone GEOMETRY...
All manuals and user guides at all-guides.com Random Access Adjustment Mode Blanking GEOMETRY BLANKING Top blanking Right blanking Left blanking Bottom blanking Adjustment of the blanking on the top of the image BLANKING Adjustment of the blanking on the bottom of the image Correct by pushing the control disc up or down Adjustment of the blanking on the left side Adjustment of the blanking on the right side...
Page 40
All manuals and user guides at all-guides.com Random Access Adjustment Mode...
All manuals and user guides at all-guides.com Installation Mode INSTALLATION MODE Starting up the Installation Mode ADJUSTMENT MODE Select a path from below : ENTER RANDOM ACCESS ENTER INSTALLATION EXIT SERVICE Source 01 INSTALLATION INPUT SLOTS 800 PERIPHERAL CONVERGENCE CONFIGURATION OSD COLOR NO SIGNAL [BLACK]...
All manuals and user guides at all-guides.com Installation Mode 800 Peripheral INSTALLATION INPUT SLOTS 800 PERIPHERAL CONVERGENCE CONFIGURATION OSD COLOR NO SIGNAL [BLACK] "800 Peripheral" INTERNAL PATTERNS ENTER Select with then <ENTER> <EXIT> to return. 800 PERIPHERAL Select with ENTER then <ENTER>...
Page 43
All manuals and user guides at all-guides.com Installation Mode Green to Midposition CONVERGENCE GREEN TO MIDPOSITION GREEN BLUE ON GREEN RED ON GREEN HATCH ABOUT MOCA GREEN TO MIDPOSITION Are you sure to set the green motorized convergence adjustment to midposition ? This adjustment cannot be undone afterwards ! <ENTER>...
Page 44
All manuals and user guides at all-guides.com Installation Mode Red on Green convergence CONVERGENCE GREEN TO MIDPOSITION GREEN BLUE ON GREEN RED ON GREEN HATCH ABOUT MOCA Select with then <ENTER> <EXIT> to return. Hatch CONVERGENCE GREEN TO MIDPOSITION ENTER GREEN BLUE ON GREEN EXIT...
All manuals and user guides at all-guides.com Installation Mode Configuration ENTER INSTALLATION INPUT SLOTS For more information, see Projector configuration in chapter 4 : 800 PERIPHERALS CONVERGENCE 'Installation Set Up'. CONFIGURATION OSD COLOR NO SIGNAL [BLACK] INTERNAL PATTERNS Select with then <ENTER>...
Page 46
All manuals and user guides at all-guides.com Installation Mode...
SERVICE MODE Starting up the Service Mode ADJUSTMENT MODE ENTER SERVICE ENTER ENTER EXIT SERVICE SERVICE BARCO CHANGE PASSWORD CHANGE LANGUAGE REALITY 9200 SERVICE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUN TIME LAMP RUNTIME HISTORY LAMP DRIVE MODE...
All manuals and user guides at all-guides.com Service Mode SERVICE PANEL ADJUSTMENT PRESET INPUT BALANCE BARCO LOGO SERVICE I2C DIAGNOSIS Identification Identification ENTER Identifica- SERVICE tion type software version Proj. Address Installation Baud rate Projector Run Time Projector Serial number...
All manuals and user guides at all-guides.com Service Mode Change Password How to enable or disable the password function ? T h is d e v ic e c o m p l ie s w it h P a r t 1 5 o f th e F C C r u le s . O p e r a t io n is s u b je c t t o fo llo w i n g t w o c o n d i ti o n s : ( 1 ) T h is d e v ic e m a y n o t c a u s e h a r m fu l i n te rf e r e n c e ( 2 ) T h is d e v ic e m u s t a c c e p t a n y in te r f e r e n c e r e c e iv e d...
All manuals and user guides at all-guides.com Service Mode Lamp Run Time History SERVICE ENTER EXIT LAMP RUNTIME HISTORY Lamp Drive Mode SERVICE LAMP DRIVE MODE LAMP DRIVE MODE BARCO logo SERVICE BARCO LOGO ENTER BARCO LOGO...
All manuals and user guides at all-guides.com Service Mode Panel Adjustments Changing these settings may seriously affect the performance SERVICE of the projector. PANEL ADJUSTMENTS ENTER WARNING Preset Input Balance Changing these settings may seriously affect the performance SERVICE of the projector. PRESET INPUT BALANCE ENTER WARNING...
All manuals and user guides at all-guides.com Appendix A : Standard Source Set Up Files STANDARD SOURCE SET UP FILES Name : FVERT Hz : FHOR kHz : FPIX MHz : PTOT : PACT : LTOT : LACT :...
Page 54
All manuals and user guides at all-guides.com Appendix A : Standard Source Set Up Files...
All manuals and user guides at all-guides.com Lenses LENSES Focusing the lens Lens Cleaning Procedure Cleaning procedure for HD(1.5-3:1) lens. FIRST lightly DO NOT DO NOT DO NOT use an aerosol. moisten the cloth or tissue Cleaning procedure for the other HD lens...
Page 56
All manuals and user guides at all-guides.com Lenses Lenses Lens formulas to calculate the projector distance.
Page 57
All manuals and user guides at all-guides.com Source Numbers 80 - 89 and 90 - 99 SOURCE NUMBERS 80 - 89 AND 90 - 99 Projector without any 800 peripheral connected. Projector with a 800 peripheral connected. Source numbers 90 - 99.
Page 58
All manuals and user guides at all-guides.com Source Numbers 80 - 89 and 90 - 99 Source numbers 81 - 85...
Page 59
All manuals and user guides at all-guides.com 5&8 5&8 DI Q V UÃTP V S 8 @T DI Q V UÃTP V S 8@T 352-(&725 352-(&725 DIQVUÃTP V S8@T DIQVUÃTP V S8@T 5&9'6 5&9'6...