Replacing Switching Power Supply - Janome MC9500 Service Manual

MC 9500

Replacing Switching Power Supply

6
5
4
3
1
2
7
www.promelectroavtomat.ru
To remove:
1 Remove face cover, belt cover, front cover and rear
cover.
2 Remove Screws (A)
machine socket and fixing plate.
3 Pull out the Machine socket unit connector
4 Remove Screw (C)
5 Remove Screws (D)
power supply
7
To attach:
6 Follow the above procedure in reverse.
1
Screw (A)
2
Screw (B)
3
Machine socket unit connector (primary circuit)
4
Screw (C)
5
Idler
6
Screw (D)
7
Switching power supply
38
2
1
, (B) and remove the
4 and remove the Idler
6
(2 pieces) and Switching
to the handwheel side.
3 .
.
5