Adjustment
1
Needle rise, hook clearance and needle height
.05.09
●
●
●
●
14
Requirement
With the stitch length set at "4.5" and in the needle rise position (see table)
1.
The hook point
5 should be positioned at "needle centre" with a hook-to-needle clea-
rance of 0.05 – 0.10 mm.
2.
The top of the needle eye should be positioned
Needle rise position
Model C:
Model C/D: Balance wheel position 204° / 2.4 mm
0,05 - 0,10 mm
5
1
Fig. 1 - 09
Set stitch length "
4.5" and bring the balance wheel into the needle rise position.
Adjust hook
1 (screws 2) in accordance with requirement 1.
Bring oil distributor ring
Without turning it, re-position the needle bar in accordance with the
Balance wheel position 202° / 2.0 mm
2
3 (screw 4) into contact with hook 1.
0.8 mm below hook point 5.
3
2
requirement 2.
4
5