Ryobi RLM4614SE Original Instructions Manual page 11

Table of Contents

Advertisement

Turn the fuel valve to the closed position.
Turn mower on its side (with carburetor facing up) and
clean grass clippings that have accumulated on the
underside of the mower deck.
Clean the underside of the mower deck.
Wipe the mower clean with a dry cloth.
Check all nuts, bolts, knobs, screws, fasteners, etc., for
tightness.
Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
Store the mower in a well-ventilated area that is clean,
dry, and out of the reach of children.
Do not store near corrosive materials such as fertilizer
or rock salt.
To lower the handle before storing:
See figure 16.
Loosen the starter rope guide knob. Remove starter
rope from guide and allow to retract into engine.
Fully loosen the handle knobs on the sides of the
handle and fold the upper handle down.
Push inward on each side of the lower handle, and
lift the sides of the lower handle past the edges of the
handle mounting brackets.
Fold the lower handle forward, making sure not to bend
or kink the control cables.
TRANSPORTATION
Stop the machine, disconnect the spark plug wire and
wait until the blade comes to a complete stop, and allow
it to cool.
Empty the fuel tank by running the engine till it stops.
Empty oil by following instruction for changing oil.
Secure the machine against movement or falling to
prevent injury to persons or damage to the machine.
English
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents