Recording A Cd - Sony LBT-XB8AV Operating Instructions Manual

Recording a CD

— CD Synchro Recording
This function lets you record from a CD to a
tape easily. You can use TYPE I (normal) or
TYPE II (CrO ) tapes. The recording level is
2
adjusted automatically.
POWER
6
DOLBY NR
1
Press 6 EJECT and insert a blank
tape into deck B.
ª ª
p 0 )
6
2
Press 6 OPEN and place a CD.
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
16
7
DSP
p
3 2 4
With the side you want to
record on facing forward
ª
p 0
P
6
ª ª
p 0 )
6
3
Close the front cover.
4
Press DISC SKIP repeatedly until
the disc number you want to record
appears in the playing position
indicator.
5
Press CD SYNC.
5
Deck B stands by for recording and the
ª
CD player stands by for playback, and
the indicator on the · button (for the
front side) lights up green.
6
Press DIRECTION repeatedly to
select A to record on one side or
ß (or RELAY) to record on both
sides.
7
Press P on deck B.
Recording starts.
To stop recording
Press p on deck B or on the CD player.
Tips
• If you want to record on the reverse side, press ª
1
so the indicator on the ª button (for the reverse
p
side) lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
before step 7 so "DOLBY NR B" appears in the
display.
• To record with the surround effect, press DSP (or
DSP MODE on the remote) so "SUR
appears in the display.
ª
The equalizer settings will not be recorded.
)
r
Note
You cannot listen to other sources while recording.
ª ª
p 0 )
P r
6
6
ª
P p
0 )
"