Trouble Shooting - HighPoint SSD7103 Installation Manual

Nvme raid controller

Hide thumbs Also See for SSD7103:

Table of Contents

SSD7103 Linux CentOS7.7 Installation Guide

6 Trouble Shooting

If you forget to install the open linux driver before updating the kernel, the system crash

cannot enter. Please follow the steps below.

a. Select the default kernel (3.10.0-1062.el7.x86_64)and enter the system.

b. Install Linux open source driver.

http://highpoint-tech.com/USA_new/series-ssd7103-download.htm

Run the .bin file to install the driver package.

# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin

c. The driver installation is complete, and the reboot can enter the system where the

new kernel is located.

# uname -r

This command is used to view the kernel version.

Appendix A

Support command:

help/info/quit/exit/create/delete.

 Create Command

Syntax

Create Array Type (RAID0/RAID1/RAID10) Member Disk list

(1/1,1/2|*)Capacity(100|*)

Examples

<<< create RAID0

<<< create RAID0 *

<<< create RAID0 * *

<<< create RAID1 1/1, 1/3 10

Create RAID0 array with all disks and with maximum capacity.

- 8 -

Table of Contents