Advertisement
Available languages
Available languages
5. Mounting the Blade.
Insert the Blade onto the Motor shaft and tighten the
Blade with the Blade Cap.
6. Mounting the Front Guard
Hold the front guard to make sure
that the Trade Mark is level and
that the front guard are centered
over the rear guard. Then push all
the safety clips firmly into place.
CAUTION
Never operate the fan with a cracked
or damaged blade.
HOW TO USE
1. Speed control
The fan speed of is controlled by button switch.
To turn on the fan. simply push any of the speed control
6
push buttons (1-2-3).
To turn it off, push the "O" button.
2. Oscillation
Push down the oscillation knob and the fan will oscillate.
Pull up the knob, the fan will not oscillate.
3. Tilting adjustment
Always switch the fan off before making a tilt adjustment.
The air flow can be adjusted upward or downward by simply moving the fan guard up or
down.
4. Height adjustment
Loosen the height adjustment knob and adjust the pipe to the desired height and then
tighten the adjustment knob.
5. Timer
A 7.5-hour (450 minutes) timer is provided for this fan.
The timer can be set up to 450 minutes as required.
Technical Data:
Working voltage: ......220-2 3 0V
Working frequency: ...50 Hz
Input Power: ............ 45 W
Rated Current: .............0,156A- 0,216A
7
Advertisement
