Mounting Of The Fan; How To Assemble - Saturn ST-FN8265 Quick Start Manual

Fan Parts Identification
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CAUTION
1. Do not plug the power cord into the wall outlet
until the fan has been completely assembled.
2. Use power source according to the electric
specifications in the rating label at the back of switch
box.

HOW TO ASSEMBLE

The only tool required for the assembly is a screw
driver.
1. Assembling the round base
Align the four holes in the base cover and the bottom base to the four holes in the outer
pipe flange.
Guard
Blade
Oasillation knob
Motor
Switch Box
Button switch
Switch box setting screw
Power Cord
Inner pipe
Outer pipe
Base Cap
Round Base
Hight Adjustment knob
Timer
4
At the same time, insert the bolts inside the four holes and tighten the flange to the base
cover and the bottom base with nuts. Then put the base cap over the outer pipe flange.
2. Mounting the switch box
Loosen the switch box setting screw by turning it anti-clockwise.
Place the hole in the bottom of the switch box over the inner pipe.
Turn the switch box setting screw clockwise to tighten it firmly.

3. MOUNTING OF THE FAN

Identification of the fan parts
1--Motor Housing
2--Rear Guard
3--Locking Nut
4--Blade
5--Blade Cap
6--Front Guard
7--Screw
4. Mounting the Rear Guard.
Mount the Rear Guard on to the Motor Housing
and secure it with the Locking Nut.
5