Getting Started
Selecting the German Display
You can select either an English or a German language
display. The factory preset language is English. To
change the display to German, follow the steps below.
MEMORY
DISPLAY
FM MODE
BAND
1
Press MENU.
2
Turn TUNING/SELECT until "LANGUAGE"
appears and then press ENTER.
"SELECT" appears in the display.
3
Turn TUNING/SELECT until "GERMAN"
appears and then press ENTER.
The display returns to the frequency indication.
To return to the English display
Repeat the procedure above to select "ENGLISH"
instead.
GB
6
MENU
TUNING / SELECT
MENU
TUNE MODE
RETURN
SHIFT
1
2
3
4
5
6
7
8
9
0
DIRECT
Changing the FM Reception
Mode
Do the procedure below to receive FM broadcasts in
PILOT TONE mode.
U
TUNING / SELECT
ENTER
ENTER
1
Press U to turn off the tuner.
2
While pressing down the numeric button 2, press
U to turn on the tuner.
"PILOT" appears in the display for about 2
seconds.
To return to POLAR mode (Stereo Plus)
Repeat the procedure above to select "POLAR"
instead. In POLAR mode (Stereo Plus), the tuner
receives FM broadcasts that are only within a
frequency range of 65 MHz to 74 MHz.
2
MEMORY
DISPLAY
MENU
FM MODE
BAND
RETURN
SHIFT
1
2
3
4
5
6
7
8
9
0
DIRECT
TUNE MODE
TUNING / SELECT
ENTER