Sony PCV-V1/D Hardware Manual page 21

Using your VAIO
Before you use the mouse
Before attempting to use the wireless mouse, you must enable communication between the computer and
the mouse.
Two AA batteries, specific for use in the wireless mouse, are supplied with your VAIO. They are identified by
a sticker "For mouse" on the packaging.
To connect the wireless mouse, proceed as follows:
1 Insert the two specific AA batteries into the wireless
mouse as shown.
2 Turn on the computer.
3 Press the CONNECT button on the left panel of the
computer.
4 Turn the wireless mouse over, slide the power button to
the ON position and press the CONNECT button.
Communication between the wireless mouse and the computer is now
active.
✍
If your wireless mouse does not operate properly, the batteries may need to be replaced. If your wireless
mouse is not being used for extended periods of time, remove the batteries to avoid possible damage
from battery leakage.
n N
20