Table of Contents
Advertisement
Using the product recovery CD-ROMs
Performing an application recovery
The final CD in the set of product recovery CD-ROMs contains most of the applications that were preinstalled
on your computer. Reinstalling a program from this application CD can fix the problems encountered if it
does not run correctly anymore, or if Windows
To perform an application recovery, proceed as follows:
1
Turn on your computer and wait until Windows
2
Insert the final product recovery CD-ROM into the disc drive.
3
Open the drive through My Computer and open the Apps folder.
4
Open the folder of the application you want to reinstall.
5
Double-click the Setup file.
6
Follow the instructions in the Installer.
✍
You must run the final product recovery CD-ROM from Windows
The application recovery does not run from DOS.
When performing an application recovery, you do not lose any data on your hard disk.
In most cases, you are advised to uninstall an application before reinstalling it.
Reinstalling a device driver from the application CD
Some applications or peripherals require specific drivers which are not found on the Windows
system.
The final CD in the set of product recovery CD-ROMs contains the drivers you need for the preinstalled
hardware devices. Reinstalling a driver from this CD can fix the problems encountered if Windows
a problem running a device. For more details on managing drivers, please see Managing drivers
(page
75).
®
is having a problem running a device.
®
has booted up.
®
.
n N
85
®
operating
®
is having
Advertisement
Table of Contents
