Using Video software
Recording on the DV device
You can automatically or manually export videos from your computer to a DV device.
To automatically export videos from your computer to a DV device, proceed as follows:
1
Connect the camera to the computer with the i.LINK™ cable and turn on the camera.
2
Launch DVgate Motion.
3
Click the down arrow and select Export-Auto from the Mode drop-down list.
4
Click the Add button in the DVgate Motion - AVI file list window and select the video file you want
to export.
5
Click Record or Record All.
The Output dialog box appears.
6
Select the Add blank image option button.
❑
You can add blank frame(s) during recording if you select the Append option button in the Output
dialog box.
Blank frame(s) can be placed in the following locations:
Head: A blank image is placed before the start of the video sequence during recording.
Tail: A blank image is placed after the end of the video sequence during recording.
Both: Blank images are placed before the start and after the end of the video sequence during
recording.
❑
You can specify the length of a blank image by entering the number of frames in the Length box in
the Output dialog box.
7
Click OK.
The Output dialog box closes and recording starts.
Video sequences are recorded on the DV device in the order in which they are arranged in the Record
List.
!
Do not quit or log off from Windows
®
while recording. Otherwise, recording will fail.
n N
26