Interior C Omp Onents - True TUI-15-R-SS-D Install Manual And User Manual

INTERIOR COMP ONENT S
See the following for the removal and correct installation of the interior components.
ICE GUIDE
WAT ER SHU T T ER
The water shutter hangs in front of the spray bar and
ice guide. It prevents spraying water from escaping the
evaporator compartment.
REMOVAL
Lift the shutter rod's ends from the recesses in the
sidewall.
INSTALLATION
Insert the shutter rod's ends into the recesses in the
sidewall. To be correctly installed, the water shutter
must–
• Hang from a shutter rod fully seated in the recessed
end supports.
• Conceal the ice guide finger holes.
TEC_TM_155 REV. A
M A I N T E N A N C E , C A R E & C L E A N I N G
SPRAY BAR
WATER
SHUTTERS
12/07/2021
ICE GUIDE
PUMP CLEAN-OUT CAP
SPRAY BAR
INCORRECT. Ice guide finger holes are visible.
CORRECT. Ice guide finger holes are hidden; ice guide slotted holes are
visible.
15" T RUE I CE M AC HINE IN STA L L GUID E
®
WATER
SHUTTERS
Page 51 of 64