Table of Contents
Advertisement
When charging, the mat should be used if
R
possible.
Wirelessly charging a mobile phone
Requirements:
The mobile phone is suitable for wireless
R
charging (Qi-compatible mobile phone).
A list of Qi-compatible mobile phones can be
found at: https://www.mercedes-benz-
mobile.com
Place the mobile phone as close to the
#
centre of mat
1
as possible with the display
facing upwards.
When the charging symbol is shown in the
multimedia system, the mobile phone is
being charged.
Malfunctions during the charging process are
shown in the media display.
%
The mat can be removed for cleaning, e.g.
using clean, lukewarm water.
Radio equipment approval numbers for Brazil
This device operates on a secondary basis, that
is to say it has no protection against harmful
interference, not even from the same type of
stations, and must not cause interference with
systems operating on a primary basis.
This product is permitted in accordance with the
procedure defined in Directive 242/2000 by the
Brazilian telecommunications agency ANATEL
and meets the applicable technical require‐
ments.
Further information is available on the ANATEL
website. www.anatel.gov.br
Seats and stowing 121
Further information on the declaration of
#
conformity for vehicle components which
receive and/or transmit radio waves.
Fitting and removing the floor mats
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
Advertisement
Table of Contents
