Table of Contents
Advertisement
118 Seats and stowing
Depending on the vehicle equipment,
#
ensure that the sliding sunroof can be
fully raised when the roof luggage rack
is fitted.
Depending on the vehicle equipment,
#
ensure that the boot lid can be fully
opened when the roof luggage rack is
fitted.
Position the load on the roof luggage
#
rack in such a way that the vehicle will
not sustain damage even when it is in
motion.
* NOTE Damage to the sliding sunroof
when a roof luggage rack is fitted
The sliding sunroof may be damaged by the
roof luggage rack if you attempt to open it
when a roof luggage rack is fitted.
Do not open the sliding sunroof when a
#
roof luggage rack is fitted.
In order to allow ventilation of the vehicle
interior, you can raise the sliding sunroof.
* NOTE Damage to the covers
The covers may be damaged and scratched
when being opened.
Do not use metallic or hard objects.
#
Carefully fold covers
1
upwards in the
#
direction of the arrow.
Secure the screws of the screw-on roof lug‐
#
gage rack to the fastening points beneath
covers
1
in compliance with the installation
instructions of the roof luggage rack manu‐
facturer.
Secure the load on the roof luggage rack.
#
Sockets
Using the 12 V socket
Requirements:
Only connect devices up to a maximum of
R
180 W (15 A).
Depending on the vehicle equipment, the vehicle
has a 12 V socket in the stowage compartment
in the front centre console. In addition, depend‐
ing on the vehicle equipment, the vehicle has a
12 V socket in the stowage compartment in the
rear centre console.
Advertisement
Table of Contents
