Sony VAIO PCV-LX2 User Manual page 72

Getting help
About i.LINK™ devices
The connected i.LINK™ device is not recognised
Disconnect the i.LINK™ device, then connect it again.
You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with
the i.LINK™ devices.
My i.LINK™ device does not appear on the desktop
To see the i.LINK™ device icon on the desktop, proceed as follows:
1 Turn off and disconnect your i.LINK™ device.
2 Reconnect your device.
3 Turn on the power on the device again.
The icon should now appear on the desktop.
I cannot establish an i.LINK™ connection between two VAIO computers
Try disconnecting and reconnecting the i.LINK™ cable.


If you still have no connection after waiting for a while, restart both computers.


If either computer has just returned from a power saving mode, the connection may be affected. In this


case, make sure you perform a full restart before connecting them.
n N
71