Advertisement
Changing the battery of the remote
control unit
Use a commercially available button battery
(CR2025).
1
Insert something narrow like a paperclip into
the hole 1 and pull out the battery tray.
Keep on slide
Pull out
2
Replace the old battery with a new one.
CR2025(+side)
¤
CAUTION
• Lithium battery.
Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type.
• The battery pack or batteries shall not be exposed to
excessive heat such sunshine, fire or the like.
• Keep battery out of reach of children and in original
package until ready to use. Dispose of used batteries
promptly. If swallowed contact physician immediately.
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be
operated, or shows an erroneous display) if the power
cord is unplugged while the power is ON, or due to
some other external factor. If this happens, execute
the following procedure to reset the microcomputer
and return the unit to its normal operating condition.
When the power is off (standby mode), press and
hold down the [SOUND] button on the main unit
for more than 2 seconds.
Unplug the AC cord and plug it back in if
"FACTORY RESET FINISHED" is appears.
• Please note that resetting the microcomputer will clear the
contents of the memory and return the unit to the state it
was in when it left the factory.
Memory back up function
Please note that the following items will be deleted from the
unit's memory if the power cord is disconnected from the
AC outlet.
• Input selector settings
• Volume level
• Sound control (preset equalizer, bass enhancement)
• Tuner setting
CAUTIONS
Supported iPod (RD-C515)
Made for
• iPod nano (1st generation)
• iPod nano (2nd generation)
• iPod nano (3rd generation)
• iPod nano (4th generation)
• iPod (4th generation)
• iPod with video
• iPod classic
• iPod touch (1st generation)
• iPod touch (2nd generation)
Connecting the iPod adapter (RD-C515)
• Connect an iPod adapter, which is provided with your iPod or
commercially available in iPod dealers, to the iPod dock of this
unit. Note that the iPod adapter is not provided with this unit.
• See page 9 for the supported iPod models.
1 Insert the iPod adapter into unit.
iPod adapter
iPod dock
2 Connect your iPod.
To remove iPod adapter (RD-C515)
• Insert a thin object such as the tip of a flat-blade screwdriver
into the slit on the dock adapter and lift it to remove.
How to confi rm μ-com version
1. Turn Power ON.
2. When the "CD NODISC" condition, press a [CLEAR], [9],
[6], [3], [8] key of a remote.
3. The version of a system μ-com and a CD μ-com is
displayed.
RD-C313/C515
LS-C313/C515
p
3
Advertisement
