Advertisement
Quick Links
Advertisement
Related Manuals for GBC AIO
Summary of Contents for GBC AIO
- Page 1 Gbc AIO Quick Start Guide...
-
Page 2: Items Not Included
Included items • 1x GBC AIO board • 1x Screen • 1x Optional USB socket • 4x Optional soft switches • 1x Speaker • 1x 3D printed power port cover • 1x 3D printed screen spacer • 1x 3D printed cart cover •... -
Page 3: Important Notes
Important Notes • Do not remove any orange Kapton tape from board/parts. Tape is adhered for electrical protection. • Project can either use 4 Gameboy color buttons with silicone button membranes, or you can use Gameboy pocket buttons (no letters on the buttons) by soldering the optional soft switches. (I personally prefer the pocket buttons) •... - Page 4 There are 2 extra spacers in case you damage/lose others. STL files can be found in the downloads tab of the GBC AIO page. 3. Clip off left headphone tab. If you are using a clear case and want to avoid damaged plastic being visible from the outside, only clip off the tab half way (height) to make enough room for the headphone jack.
- Page 6 Repeat for all pinholes. 4. Solder the SD pads and USB pads of the pi to the AIO board castellated pads from the front side of AIO board.
- Page 8 Software • Burn the provided SD image (located on the sales page for gbc aio) to an SD card that is atleast 8gb. • Once the image is burned, use the retopie menu to expand the sd card memory if you used an sd card larger than 8gb.