Table of Contents
Advertisement
Introduction for buttons on remote controller
Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
●
After putting through the power, the air conditioner will give out a sound.
Operation indicator "
models). After that, you can operate the air conditioner by using remote controller.
●
Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "di" sound, which means the signal has been sent to the air conditioner.
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2
MODE button
Press this button to select your required operation mode.
●
When selecting auto mode, air conditioner will operate automatically according
to the sensed temperature. Set temperature can't be adjusted and will not be
displayed as well. Press "FAN" button can adjust fan speed. Press "
button can adjust fan blowing angle.
●
After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator "
" on indoor unit is ON (This indicator is not available for some
models). Press "▲" or "
button to adjust fan speed. Press "
●
When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator "
for some models). Under dry mode, fan speed can't be adjusted.
Press "
" / "
●
When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF,Operation indicator is ON. Press "FAN" button
to adjust fan speed. Press"
●
When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator "
models). Press "▲" or "▲" button to adjust set temperature. Press "FAN" button
to adjust fan speed. Press "
only unit won't receive heating mode signal. If setting heat mode with remote
controller, press ON/OFF button can't start up the unit).
" is ON (red indicator the colour i s different for different
AUTO
COOL
" button to adjust set temperature. Press "FAN"
" on indoor unit is ON (This indicator is not available
" button to adjust fan blowing angle.
" / "
" on indoor unit is ON (This indicator is not available for some
" / "
DRY
FAN
" / "
" button to adjust fan blowing angle.
" button to adjust fan blowing angle.
" button to djust fan blowing angle. (Cooling
7
HEAT
"
" / "
"
Advertisement
Table of Contents
