Service Conditions; Dimensions - Eaton Cutler-Hammer TRU-START Operation And Installation Manual

2.3 SERVICE CONDITIONS

ELEVATION
AMBIENT
TEMPERATURE

2.4 DIMENSIONS

DCI
MODEL
TRU-020-DCI
TRU-040-DCI
TRU-080-DCI
TRU-125-DCI
TRU-200-DCI
TRU-300-DCI
TRU-500-DCI
NOTE : For dimensions of TRU-START DC Injection units in conjunction with
solid state C-H's starter, refer to the TRU-START manual reversing chassis dimensions.
For altitudes in excess of 2000 meters / 6600 feet above sea level,
all assemblies must be derated 1% for every 100 meters / 330 feet
above
Do not install in areas where ambient temperature falls below
0°C / 32°F or exceeds 40°C / 104°F
Height × Width × Depth
CHASSIS
41cm × 22cm × 15cm
16" × 8.5" × 6"
43cm × 27cm × 19cm
17" × 10.5" × 7.5"
43cm × 27cm × 22cm
17" × 10.5" × 8"
53cm × 27cm × 24cm
21" × 10.5" × 8.5"
28cm × 33cm × 27cm
11" × 13" × 10.5"
42cm × 37cm × 28cm
16.5" × 14.5" × 11"
45cm × 42cm × 36cm
17.5" × 16.5" × 14"
PAGE 6
NEMA 1 / NEMA 12
41cm × 22cm × 18cm
16" × 8.5" × 7"
43cm × 30cm × 27cm
17" × 12" × 10.5"
43cm × 30cm × 27cm
17" × 12" × 10.5"
53cm × 30cm × 27cm
21" × 12" × 10.5"
61cm × 61cm × 30cm
24" × 24" × 12"
76cm × 61cm × 30cm
30" × 24" × 12"
76cm × 61cm × 30cm
30" × 24" × 16"