Table of Contents
Advertisement
10.Push the DISP button twice to erase the
screen.
1-2-12. Preset Adjustment
1. Select <FILE A> with the FILE button.
Disable color bar pattern or menu display by
pushing the DISP button if necessary.
2. Push the MENU DOWN button and DATA
DOWN button simultaneously for more than 1
second.
3. The preset operation completes and "PRE-
SET OK" appears on the display.
4. Select <FILE B> with the FILE button.
5. Perform the same steps as 2 ~ 4.
6. Select <FILE C> with the FILE button.
7. Perform the same steps as 2 ~ 4.
8. Select <FILE A> with the FILE button.
1-2-13. Setting at Shipping
POWER (FRONT)
KEY LOCK (REAR)
Enlargement
A
: OFF
: OFF
1-3. Partial Adjustments
In this chapter, the adjustments required rela-
tively frequently are selected and associated
items to be checked previously or to be adjusted
before or after the adjustments are given in the
flowchart below.
Be sure to perform the adjustments following to
the flowchart.
Items shown within the frame:
Confirm and adjust if the specification is out
of its range.
This adjustment is always required.
1-3-1. Carrier Balance Adjustment
1-2-2. R - Y Carrier Balance Adjustment
1-2-3. B - Y Carrier Balance Adjustment
1-2-12. Preset Adjustment
1-2-13. Setting at Shipping
2-7
START
END
SA01:
ADJ
SA01:
NORM
Advertisement
Table of Contents
