Brother 885-V35/V37 Operation Manual page 49

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b Raise up the two legs on the reverse side of the
extension table until they click.
c Attach the extension table to the sewing
machine arm.
Keep the extension table horizontal and push it
in slowly until it stops.
Memo
● If the extension table is not stable or its
height is improper, adjust its height by
turning the rubber ends of legs.
d When you have finished sewing, remove the
extension table by pulling it to the left. Then
reinstall the flat bed attachment to its original
position.
e Turn back the extension table, and then store
the two legs in their original positions.
Memo
● When you do not use the extension table,
use it as the cover of the embroidery unit.
Sewing Cylindrical Pieces and Large Pieces 47
1