Setting The Timer - Carrier 40MHH Owner's Manual

40MHH: Owner's Manual

SETTING THE TIMER

TIMER ON/OFF
TIMER ON
Press TIMER to initiate
the ON time sequence.
TIMER
TIMER OFF setting
Press TIMER to initiate the
OFF time sequence.
TIMER
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time increases by 30 minutes increments with each press, up to 10 hours. After 10 hours and up to
24, it increases in 1 hour increments. (For example, press 5 times to get 2.5h, and press 10 times to get 5h,) The timer reverts to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
TIMER ON and OFF
TIMER ON & OFF setting
Keep in mind that the time periods you set for both functions refer to hours after the current time.
TIMER
Timer starts
Current
time 1PM
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Press Temp. UP or DOWN
multiple times to set the desired
time to turn on the unit.
x5
Press Temp. up or down multiple
times to set the desired time to turn
off the unit.
x10
Fig. 14 — Setting the TIMER ON Setting
Unit turns
ON
4PM
2:00PM 3:00PM 3:30PM
2.5 hours later
5 hours later
Fig. 15 — Timer ON and OFF
Point remote towards the unit and
wait 1 second. TIMER ON
activates.
Point remote towards the unit and
wait 1second. TIMER OFF
activates.
xn
TIMER
Unit turns
OFF
Example: If the current timer is 1:00PM,
to set the timer as above shown above,
the unit will turn on 2.5h later (3:30PM)
and then turn off at 6:00PM.
5PM
6PM
11
1
sec
1
sec