Symbols On The Product; Symbols In This Manual - Ryobi RBC36X26E Original Instructions Manual

SYMBOLS ON THE PRODUCT

Read and understand all
instructions before operating
the product. Follow all warnings
and safety instructions.
Wear ear protection.
Wear eye protection.
Do not operate the product
on inclines greater than 15°.
Mow across the face of slopes,
never up and down.
Do not expose the product to
rain or damp condition.
Beware of sharp blades.
Blades continue to rotate after
the motor is turned off. Remove
the plug from the mains before
maintenance or if cord is
damaged.
Beware of thrown or flying
objects. Keep all bystanders,
especially children and pets,
at least 15m away from the
operating area.
Keep the supply flexible cord
away from the cutting blades.
Press the start button and
squeeze the on/off trigger (A or
B) to start the product. Release
the start button and keep
squeezing the on/off trigger
to run the product. Release
the on/off trigger to stop the
product.
The handle features 3 levels
of height adjustment. Check
to ensure that the tubes are
properly inserted, especially at
the highest level. The handle
could slip out of the holes if not
properly inserted and locked.
6
Go
Stop
Class II tool, double insulation
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.
Regulatory Compliance
Mark (RCM). Product
meets applicable regulatory
requirements.
98 92
Guaranteed sound power level

SYMBOLS IN THIS MANUAL

Connect the cord to the power
outlet.
Disconnect the cord from the
power outlet.
Parts or accessories sold
separately
Note
Warning
Stop the product.
The following signal words and meanings
are intended to explain the levels of risk
associated with this product: