Stealth Cam STC-V450 User Manual page 16

All manuals and user guides at all-guides.com
Set the Capturing sequence. The Stealth Cam STC-V450 can be
programmed to shoot 1-9 pictures per triggering or 5 to 90
seconds of adjustable video.
Power on the unit, press the [MENU] button to bring up the
•
menu on the LCD screen.
Press [UP] or [DN] to highlight CAPTURE
•
Then press the [OK] button to enter capture setting.
•
Press the [UP] or [DN] button to select the desired capture
•
setting (number of pictures per triggering or video clip) If burst
mode is selected, press the [OK] to save and it will exit to
SETTING SCREEN. If VIDEO is selected, press the [OK] to
enter video time setting. Use [UP] or [DN] button to enter the
desired video length in 5 second increment. Press [OK] to
save the setting and exit to the SETTING SCREEN.
Use the UP and DOWN buttons to select additional program
•
settings or press [MENU] again to exit the SETTING SCREEN.
www.stealthcam.net
STC-V450
Toll Free 877-269-8490
16