Antenna Connection - LG M228WD Owner's Manual

PREPARATION
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
I

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction.
I
An antenna cable and converter are not supplied.
I
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Antenna
In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right.
I
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
I
All manuals and user guides at all-guides.com
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
PCMCIA EJECT
CARD SLOT
HDMI/DVI IN 1
ANTENNA
IN
- Be careful not to bend the bronze
wire when connecting to an antenna
port.
PCMCIA EJECT
- 5V antenna power works In Digital
CARD SLOT
HDMI/DVI IN 1
mode only. (Refer to p. 37)
ANTENNA
IN
HDMI IN 2
RS-232C IN
HDMI IN 2
RS-232C IN
13