Starting A Cooking Program With Moisture Plus - Miele H 7660 BP AM Operating And Installation Instructions

Moisture Plus
Starting a cooking program
with Moisture Plus
It is normal for condensation to form
on the inside of the door during steam
injection. This will dissipate during the
course of the cooking program.
 Prepare the food and place it in the
oven.
 Select
Operating Modes
 Select
Moisture Plus
 Select the operating mode you want
with moisture injection.
The cooking programs proceed in the
same way for all heating types.
The recommended temperature will
appear.
Setting the temperature
 Adjust the recommended
temperature, if necessary.
 Select
Continue
 If necessary, turn on the
function via the pull-down
Preheat
menu.
The selection display for releasing the
bursts of steam will then appear.
62
.
.
.
Selecting the bursts of steam
 Select
Automatic
- Automatic
1 burst of steam will be injected into
the oven automatically after the
preheating phase.
- Manual
You can release 1, 2, or 3 bursts of
steam manually using the touch
display.
- with timer
You can set the times for the bursts
of steam to be released. The oven
will inject 1, 2, or 3 bursts of steam at
the set times.
If you are cooking food such as bread
or bread rolls in a preheated oven, it is
best to release the bursts of steam
manually and turn on the
Preheat function. The first burst of
steam should be released as soon as
you have placed the food in the oven.
If you select more than one burst of
steam, the second burst of steam
cannot be released before the
temperature in the oven compartment
has reached at least 265°F (130°C).
If you want to use the
take the preheating phase into
account for the manual and time-
controlled bursts of steam (see
"Operation – Preheat").
 Select the number of bursts of steam
(for Manual and
 Set the times for the bursts of steam
as required.
 Select
Continue
A prompt to draw in water will then
appear.
, Manual , or with timer
Preheat function,
with timer only).
.
.