Moisture Plus; Starting A Cooking Program With Moisture Plus - Miele H 7880 BPX Operating And Installation Instructions

Moisture Plus

Your oven is equipped with a steam
injection system for cooking with
moisture. When baking, roasting, and
cooking with the
 operating mode, optimized
Plus
steam supply and air flow guarantee
even cooking and browning results.
You can also use moisture injection with
various types of heating:
- Moisture Plus + Auto Roast
-
Moisture Plus + Conv Bake
+ Conv Roast 
-
Moisture Plus + Intensive
- Moisture Plus + Surround
After selecting the operating mode you
want, set the temperature and the
number and type of bursts of steam
( Automatic , Manual
The water is injected as bursts of steam
into the oven compartment during the
cooking program. The steam openings
are located in the rear left corner of the
ceiling of the oven.
Suitable food
One burst of steam takes about 5–
8 minutes. The number of bursts of
steam and when they are injected will
depend on the type of food being
cooked:
- Yeast doughs will rise better if steam
is injected at the beginning of the
program.
- Bread and bread rolls rise better if
steam is released at the start.
Another burst of steam at the end of
the program will give the bread and
rolls a glistening crust.
60
Moisture

/
Moisture Plus


, or with Timer ).
- When roasting meat with a high fat
content, injecting steam at the
beginning of roasting will help render
the fat.
Moisture injection is not suitable for
mixtures which already contain a lot of
moisture, such as meringues. These
need to dry out during the baking
process.
Starting a cooking program
with Moisture Plus
It is normal for condensation to form
on the inside of the door during steam
injection. This will dissipate during the
course of the cooking program.
 Prepare the food and place it in the
oven.
 Select
Operating Modes
 Select
Moisture Plus
 Select the operating mode you want
with moisture injection.
The cooking programs proceed in the
same way for all heating types.
The recommended temperature will
appear.
Setting the temperature
 Adjust the recommended
temperature, if necessary.
 Select
Continue
 If necessary, turn on the
Preheat function via the pull-down
menu.
The selection display for releasing the
bursts of steam will then appear.
.
.
.