Table Of Contents; Warranty - Hanna Instruments HI 2214 Instruction Manual

Dear Customer,
Thank you for choosing a Hanna Instruments product.
Please read this instruction manual carefully before using these instruments.
This manual will provide you with the necessary information for correct
use of these instruments, as well as a precise idea of their versatility.
If you need additional technical information, do not hesitate to e-mail us
at tech@hannainst.com or view our worldwide contact list at
www.hannainst.com.

WARRANTY

HI 2214 and HI 2215 are guaranteed for two years against defects in
workmanship and materials when used for their intended purpose and
maintained according to instructions. Electrodes and probes are
guaranteed for six months. This warranty is limited to repair or
replacement free of charge.
Damage due to accidents, misuse, tampering or lack of prescribed
maintenance is not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the problem. If the repair is
not covered by the warranty, you will be notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a
Returned Goods Authorization number from the Technical Service
department and then send it with shipping costs prepaid. When
shipping any instrument, make sure it is properly packed for complete
protection.

TABLE OF CONTENTS

WARRANTY ............................................................................................. 2
PRELIMINARY EXAMINATION ...................................................................... 3
GENERAL DESCRIPTION ............................................................................ 3
FUNCTIONAL DESCRIPTION ........................................................................ 4
HI 2214 SPECIFICATIONS ........................................................................ 5
HI 2215 SPECIFICATIONS ........................................................................ 6
OPERATIONAL GUIDE ................................................................................ 7
pH CALIBRATION ...................................................................................... 9
pH BUFFER TEMPERATURE DEPENDENCE ................................................. 15
RELATIVE mV CALIBRATION .................................................................... 16
GOOD LABORATORY PRACTICE (GLP) ........................................................ 17
LOGGING FUNCTION ............................................................................... 21
SETUP .................................................................................................. 26
TEMPERATURE CALIBRATION (for technical personnel only) .......................... 30
mV CALIBRATION (for technical personnel only) .......................................... 31
PC INTERFACE ....................................................................................... 32
ELECTRODE CONDITIONING AND MAINTENANCE ......................................... 36
TROUBLESHOOTING GUIDE ..................................................................... 39
TEMPERATURE CORRELATION FOR pH SENSITIVE GLASS ............................. 40
ACCESSORIES ........................................................................................ 41
RECOMMENDATIONS FOR USERS
Before using these products, make sure they are entirely suitable for the
environment in which they are used.
Operation of these instruments in residential areas could cause
unacceptable interferences to radio and TV equipment, requiring the
operator to follow all necessary steps to correct interferences.
The glass bulb at the end of the pH electrode is sensitive to electrostatic
discharges. Avoid touching this glass bulb at all times.
During operation, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharges.
Any variation introduced by the user to the supplied equipment may
degrade the instruments' EMC performance.
To avoid electrical shock, do not use these instruments when voltages at
the measurement surface exceed 24 VAC or 60 VDC.
To avoid damage or burns, do not perform any measurement in
microwave ovens.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Hanna Instruments reserves the right to modify the design,
construction or appearance of its products without advance notice.