Canon imagePROGRAF IPF9100 User Manual page 496

Printing CAD Drawings
7.
C
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
8.
After conrming that
Target list.
Note
•
You can check the settings values selected in the
9.
Access the Finishing pane.
10.
Click Roll Paper in the
11.
Make sure the width of the loaded roll is displayed in the
ISO A2/A3 (420.0mm).
Note
•
If the width of the loaded roll is not displayed in
pane and update the printer information.
482 Enhanced Printing Options
E
Easy Settings is selected, click CAD (Line Drawing) in the
A
Media Source list.
F
Print Target list by clicking
B
Roll Paper Width list-in this case,
B
Roll Paper Width, click
F
Print
G
View set.
L
Printer on the Main