Table of Contents
Advertisement
Contents
Connections
Before using the remote control unit
The remote control unit has a built-in lithium battery.
Pull out the insulation sheet before use.
o Replacing the battery
1. Lightly slide the catch of the battery case on the back of the remote
control in the rightward direction.
2. While pushing the catch lightly to the right, pull out the battery case.
Playback
Settings
3. Remove the old battery, then insert a new coin-shaped lithium
battery (CR2025) into the battery compartment so that the + symbol
engraved on the battery faces upwards.
4. Replace the battery case in the original position.
NOTE
0 If the battery should have a leakage, immediately replace and dispose of the
battery. In this case, there is a risk of burn when the liquid comes in contact with
skins or clothes, so a great care should be taken. If the liquid accidentally comes in
contact, wash with tap water and consult a doctor.
0 Remove the battery from the remote control unit if it will not be in use for long
periods.
6
Tips
Appendix
CR2025
Advertisement
Table of Contents
