Ir Remote Control; Functions - Blaupunkt IVSC-3302 Operating And Installation Manual

IR remote control

Functions

The supplied remote control is suitable
for operating the signal controller and
the monitors.
You must enter a button combination
in order to control a single monitor
or all the monitors simultaneously.
To do so, you first select the monitor
(FRONT/LEFT/RIGHT-OVERHEAD or
ALL) and then the function that you
require. The selected monitor or
monitors remain(s) selected until you
press one of the buttons (FRONT/
LEFT/RIGHT-OVERHEAD or ALL)
again.
1 2
NAVI
POWER
<
AUDIO CH VOL
BOOSTER
;
:
FRONT
9
LEFT ALL
8
OVERHEAD
7
3
MUTE
4
5
CH
RIGHT
IVRC 05
6
IR REMOTE CONTROL
1 POWER
On/off button for the selected
monitor or monitors.
2 NAVI
Button has no function.
3 VOL • arrow button
Increase the volume for the se-
lected monitor (not Audio OUT).
VOL • arrow button
Decrease the volume for the se-
lected monitor (not Audio OUT).
4 MUTE
Mute the volume for all the con-
nected monitors and Audio OUT.
5 CH • arrow button
Select the input source for the se-
lected monitor.
6 RIGHT
Select the RIGHT / OVERHEAD
monitor.
7 OVERHEAD
Select the RIGHT / OVERHEAD
monitor.
8 ALL
Select all monitors.
9 LEFT
Select the left monitor.
: FRONT
Select the front monitor.
/
11