Table of Contents
Advertisement
M
aintenance and care
cleaning clogs
low suction or poor pickup may be
due to a clog in the vacuum cleaner. if
you notice a change in the sound of the
motor or a reduction in the spinning
action, check for clogs.
1. Unplug cleaner from electrical outlet.
2. Empty dirt container.
3. Check upper tank for build up or clogs.
4. Remove the secondary cyclone and check
the suction inlet for a clog.
5. Grasp the hose grip and lift to separate
from the suction opening. Check for a
clog in the base or the hose.
6. Release the Twist n' Snap hose from the
vacuum by turning to the left. Straighten
the hose and unclog with a long, narrow
object such as a broomstick.
7. If the low suction persists, follow the
instructions for checking the rotating
brush on page 12 and inspect the air
passageway for obstructions.
14
w w w . b i s s e l l . c o m
4.
5.
7.
Air Passageway
Suction
Inlet
Suction
Opening
8 0 0 . 2 3 7 . 7 6 9 1
Hide quick links:
Advertisement
Table of Contents
