Table of Contents
Advertisement
6. Untie and discard the wire ties on the Main
Wire Harness (43) and the Pulse Extension
Wire (79).
While another person holds the Console (4)
near the Upright (2), connect the wires on the
Console to the Main Wire Harness (43) and to
the Pulse Extension Wire (79).
Insert the excess wire into the Upright (2) or
into the Console (4).
Tip: Avoid pinching the wires. Attach the
Console (4) to the Upright (2) with four M4 x
16mm Flange Screws (80).
7. Identify and orient the Seat Handlebar (11) so
that the contacts on the Pulse Grips (10) face
upward. Make sure that the hexagonal holes
are in the indicated locations.
Tip: Avoid pinching the Pulse Wire (58).
Attach the Seat Handlebar (11) to the Seat
Carriage (3) with two M10 x 32mm Button Bolts
(78) and two M10 Locknuts (64). Do not fully
tighten the Locknuts yet.
All manuals and user guides at all-guides.com
9
6
4
43
Avoid pinching
the wires
7
10
Hexagonal
11
Holes
58
3
78
79
2
80
80
Avoid pinching the
Pulse Wire (58)
10
64
Advertisement
Table of Contents
