Bag Change Indicator - Bissell CLEANVIEW 59M5 User Manual

O
perations
Variable suction power control
The variable suction power control
is located on the top of the vacuum.
Slide the control toward the larger
dots for maximum suction. Slide the
control toward the smaller dots to
minimize suction for lightly soiled
areas or delicate fabrics.
Air flow regulator
Open the air flow regulator by
sliding the regulator back towards
the handle to an open position to
reduce suction for delicate fabrics.
Close the air flow regulator by
sliding the regulator down to the
closed position for full suction.
High filtration dust bag
The BISSELL Cleanview Pet Ultimate
features a non-woven, high filtration
dust bag that captures more fine dust
than traditional paper dust bags,
giving off less dust emissions. It also
holds more fine dust particles, giving
you longer lasting suction power.

Bag change indicator

The bag change indicator is located
between the power button and the
automatic cord rewind button. If the
bag change indicator turns orange
while you are vacuuming, the dust
bag needs to be replaced. The dust
bag may appear to be full or only
partially full depending upon the type
of debris picked up. Fine particles
can block the airflow in the dust bag
and reduce suction before the dust
bag is full. If the bag change indicator
remains orange, even after changing
the dust bag, turn the vacuum off and
check for a clog in the hose or tools.
NOTE: The indicator may turn
orange when using the tools due to
the restricted airflow. This does not
necessarily mean that the dust bag
is full. If the indicator does not turn
off once the tool is removed, check
for a clog in the hose/tools or
replace the dust bag.
w w w . b i s s e l l . c o m
9