Bissell Momentum/PowerTrak 82G7 Series User Manual page 14

M
aintenance and care
Maintaining TurboBrush
The TurboBrush should be checked regularly for
clogs or debris wrapping around the brush.
1. Unplug the vacuum from electrical outlet.
2. If a clog is present or debris is visible, unscrew
the two screws on the back of the TurboBrush to
remove the faceplate and clear any obstructions.
3. To clean debris from the brush, remove the
brush from the drive belt and clean debris.
4. Reposition the drive belt on the brush.
Place ends of brush in slots on sides as
shown. Reposition faceplate and secure with
two screws.
14
w w w . b i s s e l l . c a
DJ68-00375P (EN)-0.1.indd 14
2.
4.
1 - 8 0 0 - 2 6 3 - 2 5 3 5
09. 12. 03 9:16