Table of Contents
Advertisement
MENU OPERATIONS
B. Video Output
Select the mode of Video output among RGB, S-Video, YUV and CVBS on TV SCART
by using
,
buttons.
C. VCR SCART Type
Select the VCR SCART type either Standard or External A/V. In case of External A/V,
the source of TV SCART Output will be selected between VCR SCART input and
internal AV by pressing
button on the RCU. In case of Standard, it will be done
automatically by the SCART functionality.
D. TV Aspect Ratio
Select your TV screen format. Select 4:3 or 16:9 mode by using
,
buttons.
E. 16:9 Display Format
If you have a TV set with the 4:3 picture format and transmission is in 16:9, you can
select the display format. Select the Letter Box or Center extract by using
,
buttons.
F. Sound Mode
It allows you to configure the sound mode. Select the Stereo, Mono, Left and Right
mode by using
,
buttons. The Sound mode is configurable later on by using
button on your RCU.
G. RF Output
When the STB is connected to the TV by an RF cable, you may need to select the
correct TV standard system. Select the PAL G, PAL I, PAL K, NTSC M mode by using
,
buttons.
H. RF Channel
Select a RF channel by using
,
buttons. The default RF channel is CH36.
When you change the RF channel number, you must also change to the same value on
the TV. If you do not, there will be no picture and sound.
OSD Transparency
Adjust the OSD transparency of all the menus. The available levels are ranging from 0%
to 50%.
21
Advertisement
Table of Contents
