M
aintenance and care
pet turbobrush
note: 67f8 models include the pet
turboeraser™ tool that follows the
same maintenance steps as the pet
®
turbobrush
tool.
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
2. Turn tool so bottom side faces up and remove
the two screws.
3. Remove the faceplate and clear any
obstructions.
4. Remove the brush from the drive belt to
clean debris.
5. Reposition the drive belt on the brush, and
place ends of brush in slots on the side.
Reposition faceplate and secure with
two screws.
note: this tool is designed to
remove pet hair from upholstered or
carpeted surfaces. it should not be
used on pets.
14
w w w . b i s s e l l . c o m
tool Maintenance
®
2.
8 0 0 . 2 3 7 . 7 6 9 1