Harmony / Arpeggio Settings; Synchronizing An Arpeggio To Song/Style/Groove Playback (Arpeggio Quantize); Maintaining Arpeggio Playback Via The Footswitch (Arpeggio Hold) - Yamaha PSR-E473 Reference Manual

Harmony / Arpeggio Settings

Synchronizing an Arpeggio to
Song/Style/Groove Playback
(Arpeggio Quantize)
When you play the keyboard to trigger an Arpeggio
along with Song/ Style/Groove playback, you'll need
to play the notes with accurate timing to keep the
Arpeggio in synchronization with the other playback
tracks. However, since your actual timing may be
slightly ahead of or behind the beat (or both), you
can use the "Arpeggio Quantize" function here to cor-
rect any slight imperfections in the timing (according
to the three settings below), to ensure appropriate
Arpeggio playback.
• OFF: No synchronization
• 1/8: Synchronizes to 8th notes
• 1/16: Synchronizes to quarter notes
When you select an Arpeggio Type, one of the
options above is selected automatically. However,
the settings is changeable.
1
Press the [FUNCTION] button to call up
the Function display.
2
Rotate the dial until "Quantize" (Func-
tion 053) is shown on the display.
3
Press the [ENTER] button.
The current value is shown on the display.
1/8
2
053
4
Rotate the dial to select a setting from
OFF, 1/8 or 1/16.
5
Press the [FUNCTION] button to exit
from the Function display.
10
PSR-E473, PSR-EW425 Reference Manual
Quantize
053
Current value
Maintaining Arpeggio Playback
via the Footswitch
(Arpeggio Hold)
You can set the instrument so that Arpeggio play-
back continues even after the note has been
released, by pressing the footswitch connected to the
[SUSTAIN] jack.
1
Press the [FUNCTION] button to call up
the Function display.
2
Rotate the dial until "PdlFunc" (Function
054) is shown on the display.
PdlFunc
3
Press the [ENTER] button.
The function currently assigned to the footswitch
is shown on the display.
Sustain
1
054
4
Rotate the dial to select "ArpHold."
ArpHold
2
When you want to restore the footswitch function
to sustain, select "Sustain." When you want to
use both hold and sustain functions, select
"Sus+ArpH."
5
Press the [FUNCTION] button to exit
from the Function display.
6
Try playing the Arpeggio with the foot-
switch.
Play the keyboard to trigger the Arpeggio, and
then press the footswitch. Even if you release the
keyboard, Arpeggio playback continues. To stop
Arpeggio playback, release the footswitch.
054
Currently assigned
function.
054