Auto maintenance settings
This setting item is displayed by tapping Printer settings after tapping
screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
•
• Auto nozzle check
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
•
• Nozzle check error display
Enables/Disables displaying the nozzle check error.
•
• System Cleaning frequency
Specifies the frequency of automatic system cleaning.
Note
• To maintain print quality, we recommend you select Short if you use the printer at a higher place.
•
• Print pattern after new head
Selects whether you print an adjustment pattern after replacing the Print head.
179
(Setup) on the HOME