Hard Floor Cleaning - Bissell POWERSTEAMER 1370 SERIES User Manual

Bissell carpet cleaner user manual
Hide thumbs Also See for POWERSTEAMER 1370 SERIES:
Table of Contents

Advertisement

O
peration

Hard Floor Cleaning

Your deep cleaner may have included a hard
floor tool and Hard Floor Solutions Formula.
The hard floor tool provides effective cleaning
for linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1. Thoroughly vacuum or sweep floor to pick
up any debris.
NOTE: Prior to filling with formula and
water be sure all carpet cleaning formula is
thoroughly rinsed from tank.
2. Fill BISSELL 2X Hard Floor Solutions Formula to
the indicated fill line in the built in measuring
cup and pour into mouth of bladder.
3. Fill the bladder with clean hot tap water and set aside.
4. Attach the hard floor tool to the bottom of the
machine by hooking it into the nozzle and
swinging it down until it clicks into place.
5. Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6. Plug into an outlet and turn the power on.
7. Plan your cleaning route to leave an exit path.
Be sure to allow adequate time for floors to dry.
8. While pressing the spray trigger, make one
slow forward wet pass and another back.
Caution: Do Not Overwet.
9. Repeat the motion without pressing the
trigger using the hard floor tool to squeegee
and suction up the dirty water.
10. When finished, remove hard floor tool, rinse
and let dry before storing. Refer to the
Maintenance section below for machine
clean up and storage instructions.
M
aintenance and care
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power switch OFF
machine and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse it out
at a faucet with running hot tap water, taking care
to clean underneath and around the heavy duty
bladder. Clean out red lint screen. Removable
nozzle may be rinsed if necessary.
8
w w w . b i s s e l l . c o m
. Unplug the
(O)
WARNING:
To reduce the risk of fire and
electric shock- when cleaning a hard
floor, the BISSELL hard floor tool
203-5641 must be used and it must
only be used with BISSELL Hard Floor
Solutions or BISSELL 2X Hard Floor
Solutions cleaning fluid intended for
use with this appliance.
4.
8 0 0 . 2 3 7 . 7 6 9 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents