Table of Contents
Advertisement
2. REMOVAL OF SWITCH UNIT PROCEDURE
The switch unit is attached to front cabinet assembly with two
hooks.
1) Push point A as shown and rotate switch unit clockwise to
release the hook from front cabinet assembly.
Push point A
2) Push point B as shown and rotate switch unit counterclock-
wise to release the hook from front cabinet assembly.
Push point B
3. REMOVAL AND INSTALLATION OF TOP
STAY PROCEDURE
Top stay
3-1. REMOVAL OF TOP STAY PROCEDURE.
1) Minus driver is put in a gap of clamper.
2) Move top stay slide while lifting clamper.
3
3-2. INSTALL OF TOP STAY PROCEDURE.
1) Top stay is inserted from a back side in panel.
2) Move top stay slide and install it.
2
Note: When reusing top stay, please use with removed set.
3) Please confirm that emdossing of top stay is locked in a hole
of panel.
[ HOLE ]
KDL-46/52Z5588, 46/52Z5599 (CH)
1
2
1
[ EMBOSSING ]
Appendix-2E
Advertisement
Table of Contents
