Ac Inlet And Frame Removal; Hl1A (Hl5) And Hsn Boards, Lcd Panel Removal - Sony KDL-46Z5588 Service Manual

KDL-52Z5588/52Z5599

1-2-7. AC INLET AND FRAME REMOVAL

0 VESA bracket
9 VESA bracket

1-2-8. HL1A (HL5) AND HSN BOARDS, LCD PANEL REMOVAL

KDL-52Z5599
2 Illumination module
Front cabinet assy (52)
Note: 1. Please note that when replacing the LCD Panel, be sure to remove the heat sink (T-CON
SLIM) and radiation sheet (T-CON SLIM) from the original LCD panel and then attach
them to a new LCD panel.
2. Please note that replacing top stay, refer to "APPENDIX/3. REMOVAL AND
INSTALLATION OF TOP STAY PROCEDURE".
2 Under cover
7 Three screws
(+PSW M5X12)
8 One screw
(+PSW M3X8)
9 Heat sink
(T-CON SLIM)
0 Radiation sheet
(T-CON SLIM)
qa One screw
(+PSW M3X8)
qs Heat sink
qd Radiation sheet
(T-CON SLIM)
1 HL5 board
1 Two screws
(+BVTP 4X16)
3 One screw
8 Bottom frame
qs VESA bracket
5 Top stay
(T-CON SLIM)
KDL-52Z5588
4 Illumination module
Front cabinet assy (52)
KDL-46/52Z5588, 46/52Z5599 (CH)
(+KTT 3X10 (S TYPE))
5 One screw
(+PSW M5X12)
6 AC inlet bracket
4 AC inlet filter
qa VESA bracket
6 Five screws
(+BVTP 4X16)
7 LCD panel
1 HL1A board
2 HSN board
3 Light guide
1-8E