Sony TRINITRON KV-HW21P80A Service Manual page 52

Presetting channels (continued)
To change the color system setting
If the color is abnormal when receiving programs through the 8 (antenna input)
terminal or the t (video input) terminal
(1) Press SELECT until "COLOR SYS" appears on the screen.
(2) Press + or – to select the appropriate color system until the color is optimal.
AUTO PAL
To skip program numbers
(1) Press PROGR +/– or the number buttons until the unused or unwanted program
number appears on the screen.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – once to enter the "MANUAL PROGRAM" mode.
(4) Press PIC MODE to skip the unused or unwanted program number.
(5) Press SELECT to exit the "MANUAL PROGRAM" mode.
Note
• To restore the skipped program number again, preset the channel automatically or manually.
To use the fine tuning function
The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – once to enter the "MANUAL PROGRAM" mode.
(4) Press to display "FINE" on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to exit the "MANUAL PROGRAM" mode.
NTSC3.58 NTSC4.43