A.O. Smith ZIP User Manual page 9

Installation (contd...)
• Remove the Mounting bracket from the
back side of the product.
• Mark the holes using Mounting bracket
(Step 1).
• Drill 4 holes of diameter 6 mm (Step 2).
Figure 7
1
Holes
Mounting
bracket
2
Drilling
Tool
Mount the Water Heater on the Mounting bracket. Tug downwards on the Water Heater to
ensure that the Water Heater is fixed steadily on the Mounting bracket.
Figure 9
Concrete Concrete
Mounting
bracket
Wall Wall
Water Water
Heater Heater
• Insert the Expansion Anchor into the hole
(Step 1).
• Insert the Mounting screw over the
Expansion Anchor through the Mounting
bracket and tighten the Mounting screw by
rotating it till it gets fixed steadily (Step 2).
Figure 8
1
Concrete Concrete
Wall Wall
2
Concrete Concrete
Wall Wall
2
Concrete
Wall
Water
Heater
6
Expansion
Anchor
Mounting
screw
Mounting
bracket
Mounting
screw
1