Dc Application - Honda EG4000CX Owner's Manual

GENERATOR USE

DC Application

The DC terminals may be used for charging 12 volt automotive-type
batteries only.
1.Connect the charging cable to the DC terminals and battery terminals
in numerical order as shown.
(1)to positive (+) battery terminal
(2)to positive (+) DC terminal
(3)to negative (–) battery terminal
(4)to negative (–) DC terminal
CHARGING CABLE
2.Start the engine and charge the battery.
An overloaded DC circuit will trip
the DC circuit protector (push
button comes out).
If this happens, check the short
circuit of counter connection and
wait a few minutes before pushing
the circuit protector.
26
DC TERMINALS
DC CIRCUIT PROTECTOR
OFF
ON
Push.