Epson XP-610 Quick Start Manual page 2

5
Connect the fax line (XP-810)
Connect the phone cord to a telephone wall
jack and to the LINE port on your product.
See the online User's Guide for more
information.
6
Install software
Using the CD
1
M ake sure the printer is NOT CONNECTED to
your computer.
W indows ® : If you see a Found New Hardware screen,
click Cancel and disconnect the USB cable.
2
I nsert the product CD and follow the instructions
on the screen to run the setup program.
M ac OS X: Make sure you install Software Updater;
internet connection required.
3
W hen you see the Select Your Connection screen, select one of the following:
•
Wireless connection
I f you're using Mac OS X 10.6, 10.7, or 10.8, you will need to use the
buttons on the printer to select wireless settings.
M ake sure you know your network name (SSID) and network password.
•
Direct USB connection
Make sure you have a USB cable (not included).
•
Wired network connection (XP-810)
Make sure you have an Ethernet cable (not included).
Any problems?
Network setup was unsuccessful.
• Make sure you select
• If you see a firewall
• If your network has
(WEP key or WPA
correct case.
You see error messages on the printer's screen.
See the online User's Guide
All manuals and user guides at all-guides.com
the right network name (SSID).
alert message, click Unblock or Allow to
security enabled, make sure you enter your
passphrase) correctly. Password must be
for troubleshooting information.
Setup is unable to find my printer after connecting it with a USB cable.
Make sure it is securely connected as shown:
Any questions?
Quick Guide
Basic information and troubleshooting.
User's Guide
Click the icon on your desktop (or in the Applications/Epson Software/Guide folder
in Mac OS X) to access the online User's Guide.
Need paper and ink?
let setup continue.
network password
entered in the
XP-610/XP-810 replacement ink cartridges
Color Standard-capacity High-capacity
Photo Black 273
Black 273
Cyan 273
Magenta 273
Yellow 273
273XL
273XL
273XL
273XL
273XL